b. Firmly pull outward on the open tray (2) until the optical drive slides out.
c. Firmly pull outward on the bezel to remove the bezel from the optical drive tray.
Reverse this procedure to reassemble and install the optical drive.
Upgrade bay hard drive
NOTE: The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
642774-001.
Description Spare part number
7.0 mm, 9.5 mm, or 12.7 mm 500 GB hard drive, 7200 rpm 652552-001
60 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
