9. Turn the keyboard over to rest on the palm rest.
10. Release the keyboard ZIF connector (1) and lift the keyboard cable (2) to release it.
11. Release the pointing stick ZIF connector (3) and lift the cable (4) to release it.
Reverse this procedure to install the keyboard.
Fan/graphics board heat sink assembly
NOTE: The fan/graphics board heat sink assemblies include replacement thermal material.
Description Spare part number
For use only with computer models equipped with ATI graphics subsystems 652543-001
For use only with computer models equipped with NVIDIA graphics subsystems 652544-001
68 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
