10. Replace the drive cage. Align the rivets on the front of the cage with the slots on the chassis, press the
front of the cage down into the slots, and then slide the cage forward (1). Then press the rear of the cage
down (2) so that the drive lock mechanism latches onto the drive cage (3).
11. Connect the power and data cables to the rear of the drives in the hard drive cage.
12. Replace the computer access panel.
13. Reconnect the power cord and any external devices, and then turn on the computer.
14. Lock any security devices that were disengaged when the access panel was removed.
Removing and installing drives 43
To Next Page
Loading...
