3. Adjust the monitor’s height to a comfortable position for your individual workstation. The monitor’s top
bezel edge should not exceed a height that is parallel to your eye height. A monitor that is positioned
low and reclined may be more comfortable for users with corrective lenses. The monitor should be
repositioned as you adjust your working posture throughout the work day.
4. You can pivot the display head from landscape to portrait orientation viewing to adapt to your
application.
a. Adjust the monitor to full height position and tilt the display head back to full tilt position.
b. Pivot the display head clockwise 90° from landscape to portrait orientation.
CAUTION: If the monitor is not in full-height and full-tilt position when pivoting, the bottom right
corner of the display head will come in contact with the base and potentially cause damage to the
monitor.
NOTE: To view information on the screen in portrait mode, you can install the HP Display Assistant
software included on the software and documentation optical disc. The position of the OSD menu can
also be rotated to portrait mode. To rotate the OSD menu, access the OSD menu by pressing the Menu
button on the front bezel, select OSD Control from the menu, and then select OSD Rotation.
10 Chapter 1 Getting Started