HP EliteDisplay E240 User Manual

41 pages

To Next Page

To Previous Page

Using Auto-Sleep Mode

The monitor supports an OSD (On-Screen Display) menu option called Auto-Sleep Mode that allows you to

enable or disable a reduced power state for the monitor. When Auto-Sleep Mode is enabled (enabled by

default), the monitor will enter a reduced power state when the host PC signals low power mode (absence of

either horizontal or vertical sync signal).

Upon entering this reduced power state (sleep mode), the monitor screen is blanked, the backlight is turned

off and the power LED indicator turns amber. The monitor draws less than 0.5 W of power when in this

reduced power state. The monitor will wake from the sleep mode when the host PC sends an active signal to

the monitor (for example, if you activate the mouse or keyboard).

You can disable Auto-Sleep Mode in the OSD. Press one of the four front bezel Function buttons to activate

the buttons, and then press the Menu button to open the OSD. In the OSD menu select Power Control > Auto-

Sleep Mode > Off.

Using Auto-Sleep Mode 19

Questions and Answers:

Need help?

Do you have a question about the HP EliteDisplay E240 and is the answer not in the manual?

General

3D	No
Aspect ratio	16:9
Screen shape	Flat
Display diagonal	23.8 \
Display technology	LED
Viewable size, vertical	296.46 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	527.04 mm
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1400 x 900, 1600 x 900, 1680 x 1050 (WSXGA+)
On/off switch	Yes
USB hub version	2.0
USB Type-A downstream ports quantity	3
Product color	Black
Country of origin	China
Market positioning	Business
Pivot angle	0 - 90 °
Tilt angle range	-5 - 25 °
Panel mounting interface	100 x 100 mm
Sustainability certificates	ENERGY STAR
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	35 W
Power consumption (off)	0.12 W
Annual energy consumption	31 kWh
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W