HP EliteOne 705 G2 - Attaching and Removing a Stand; Recline Stand; Attaching a Recline Stand

4. Pull the port cover toward the bottom and o the computer (2).
Attaching and removing a stand
Three stands are available for the computer:
●
Recline stand
●
Adjustable-height stand
●
Easel stand
Recline stand
Attaching a recline stand
To install the stand:
1. Place the computer face down on a soft at surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
2. Engage the hooks in the top of the stand in the two large holes in the upper part of the back of the
computer (1).
32 Chapter 4 Removal and Replacement Procedures