HP End-of-Life User Manual

EL-MF877-00 Page 3
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Step1 Use T-15 screwdriver to Loose thumb
screw and remove access panel.
Step2 Remove front bezel from chassis
Step3 Loose screw and remove blank module
Step4 Disconnect HDD power cable and HDD SATA cable
from 1
st
HDD.
Step5 Disconnect ODD power cable and ODD SATA
cable from ODD.
Step6 Press the ODD’s latch on ODD cage and remove ODD

HP End-of-Life Specifications

General

Brand	HP
Model	End-of-Life
Category	Desktop
Language	English