HP Engage Flex pro

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Engage Flex Pro-C
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sqcm
2
Batteries
All types including standard alkaline and lithium
coin or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
250W EPA92 RPOSL18
1
External electrical cables and cords
1
Gas Discharge Lamps
Plastics containing Brominated Flame
Retardantsweighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos

HP Engage Flex pro Specifications

General

Memory	Up to 64GB DDR4
Storage	Up to 1 TB NVMe PCIe SSD
Graphics	Intel UHD Graphics
Operating System	Windows 10 Pro
Ports	USB 3.2 Gen 1, DisplayPort, RJ-45, audio jack
Network	Gigabit Ethernet, Wi-Fi 6
Expansion Slots	M.2
Audio	Internal speaker
Processor	Intel Core i3/i5/i7

Summary

Items Requiring Selective Treatment

Printed Circuit Boards and Assemblies

Includes PCBs and PCAs with a surface area greater than 10 sqcm.

Batteries

All types of batteries, including alkaline and lithium coin/button styles.

Mercury-Containing Components

Components containing mercury, such as lamps and backlights.

Liquid Crystal Displays

LCDs with a surface area exceeding 100 sq cm, potentially with gas discharge lamps.

Tools Required for Disassembly

Screwdriver Types

Specifies T-15 and PH1 screwdrivers for component removal.

Product Disassembly Process Steps

Access Panel and Front Panel Removal

Steps for removing the initial access and front panels of the computer chassis.

Optical Drive (ODD) Removal

Instructions for disconnecting and removing the ODD from its cage.

Hard Disk Drive (HDD) Removal

Procedure for disconnecting SATA cables and removing the HDD.

Mainboard (MB) Component Removal

Steps to disconnect and remove components like PSU, FIO, memory, CPU, and heatsink.