HP Engage Go Convertible System Hardware Reference Guide

Locating the mobility head unit power button
The power button is located on the top left edge of the bezel.
Locating the I/O connectivity base power button
The I/O connectivity base power button is located on the underside of the I/O connectivity base.
The mobility head unit controls the I/O connectivity base. When the mobility head unit is turned o, the I/O
connectivity base is turned o and power is available only from the I/O connectivity base’s USB Type-C port
that connects to the mobility head unit. That port remains powered so that it can continue to communicate
with the mobility head unit and allow the I/O connectivity base to turn back on when the mobility head unit is
turned on.
After the system has been turned o, you can press the power button on the underside of the I/O connectivity
base to allow power to be available on the I/O connectivity base ports while the mobility head unit remains
turned o.
Locating the mobility head unit power button 7

HP Engage Go Convertible System Specifications

General

Brand	HP
Model	Engage Go Convertible System
Category	Touch terminals
Language	English