Connecting the Cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a cable.
NOTE: The monitor is capable of supporting analog or HDMI input. The video mode is
determined by the video cable used.
The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Input Control/Plus button on the front panel or through the On-
Screen Display (OSD) feature by pressing the Menu button.
●
A VGA cable is provided with the monitor for analog operation. Connect the provided VGA
cable to the VGA connector on the rear of the monitor and the other end to the VGA
connector on the source device.
Connecting the Cables 5
To Next Page
Loading...
