HP E24mv User Manual

EL-MF877-00 Page 1
Template Revision D
last updated May-2022
HP Inc. instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP E24mv G4 FHD Conferencing Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HP Inc. products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking or identification of location of parts or components requiring selective treatment,
please contact HP’s Sustainability Contact
.
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment. An “X” in the list of components and parts indicates the product
contains the component or part requiring selective treatment
Item Description
Components and parts requiring selective
treatments
Quantity of
items
included in
product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA) with a surface greater than 10 sq cm
☒ Main board (MB) PCB
☐ Solid state drive (SSD) PCB
☐ Wireless WAN module (WWAN) PCB
☐ Touch module PCB
☒ Power supply PCB
☐ External Keyboard (KB)
☐ External Mouse
☒ Others: _______Key Board & USB board&Audio
board______
5
Batteries, excluding Li-Ion batteries. This includes
standard alkaline, coin or button style batteries
☐ RTC/CMOS battery
☐ Others: _____________
0
Li-Ion batteries. Includes all Li-Ion batteries if more
than one is provided with the product (such as a
detachable notebook keyboard battery, etc.)
Li-ion battery(ies) are attached to the product by:
☐ screws
☐ snaps
☐ adhesive
☐ other. Explain
0
Mercury-containing components. For example,
mercury in lamps, display backlights, scanner lamps,
switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm. Includes background illuminated
displays with gas discharge lamps
☒ Panel LCD
1

HP E24mv Specifications

General

Screen Size	23.8 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Refresh Rate	60 Hz
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	1000:1
Built-in Webcam	Yes
Height Adjustment	Yes
Color Gamut	72% NTSC
Tilt Adjustment	Yes
Response Time	5 ms
Ports	HDMI, DisplayPort, VGA, USB
Speakers	Yes, 2 x 2W
Viewing Angle	178° (H) / 178° (V)
VESA Mount	100 x 100 mm

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB)

PCBs or PCAs with a surface greater than 10 sq cm require selective treatment.

Batteries (excluding Li-Ion)

Includes standard alkaline, coin, or button style batteries for selective treatment.

Li-ion Batteries

All Li-ion batteries provided with the product require selective treatment.

Mercury-containing components

Components like lamps or backlights containing mercury require selective treatment.

Liquid Crystal Displays (LCD)

LCDs over 100 sq cm with gas discharge lamps require selective treatment.

Tools Required

Screwdrivers

Standard and HEX header screwdrivers for disassembly and re-assembly.

Heatgun

Tool for heating components during disassembly.

Suction cup

Tool used for gripping or lifting parts during disassembly.

Product Disassembly Process

Preparation and Stand-base Removal

Lay monitor flat and remove the stand-base assembly.

Rear Cover and Internal Component Removal

Remove rear cover, tapes, connectors, webcam, audio, USB, and keyboard components.

Main Board and Power Board Removal

Remove mylar, main board, and power board.

Connector Board and Webcam Module Removal

Remove connector board, disconnect pins, and remove webcam module.