EasyManua.ls Logo

HP ENVY x2 - Page 15

HP ENVY x2
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Left side
Component Description
(1)
Audio-out (headphone)/Audio-in (microphone)
jack
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional microphone-only devices.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,
Safety, and Environmental Notices. To access this guide, from
the Start screen, type support, and then select the HP
Support Assistant app.
NOTE: When a device is connected to the jack, the tablet
speakers are disabled.
NOTE: Be sure that the device cable has a 4-conductor
connector that supports both audio-out (headphone) and audio-
in (microphone).
(2)
Memory card reader Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
Hold the card label-side up, with connectors facing the slot,
insert the card into the slot, and then push in on the card until it
is firmly seated.
To remove a card:
Press in on the card it until it pops out.
(3)
Hard drive light
Blinking white: The hard drive is being accessed.
(4)
Power light
On: The tablet is on.
Blinking: The tablet is in the Sleep state, a power-saving
state. The tablet shuts off power to the display and other
unneeded components.
Off: The tablet is off or in Hibernation. Hibernation is a
power-saving state that uses the least amount of power.
(5)
Volume buttons Controls speaker volume on the tablet.
To increase speaker volume, press the + edge of the
button.
To decrease speaker volume, press the – edge of the
button.
Left side 5

Other manuals for HP ENVY x2

Related product manuals