HP EVA P6000 Software Guide

6. Click Continue to proceed or Cancel to exit the procedure.
The Code Load Storage System – Page 1 window (Figure 16 (page 47)) opens.
Check the box “I have completed the storage system and SAN checks outlined in the HP
StorageWorks Enterprise Virtual Array Updating Product Software Guide for my storage system
version.” and click Next Step (which is disabled if the box is not checked).
7. Figure 16 Code Load Storage System — Page 1 window
8. If your drive-addition policy is set to Automatic, respond to the following message:
9. If your drive-addition policy cannot be determined, respond to the following message:
10. The Code Load Storage System — Page 2 window opens.
Step 5. Upgrading the controller software 47

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers