2.5 Active/inactive support for controller software
Controller Software
Active As Of Inactive As Of
3.110
1
31 Dec 2010
4.100
1
31 Dec 2010
5.100 (without HP P6000 Continuous Access) 31 Dec 2007
5.100 (with HP P6000 Continuous Access) 30 Sep 2008
5.110 (without HP P6000 Continuous Access) 31 Dec 2007
5.110 (with HP P6000 Continuous Access) 31 Oct 2008
6.000 31 Dec 2007
6.100 31 Aug 2009
6.110 31 Aug 2009
6.200 31 Aug 2011
6.220 20 Mar 2009
6.240 7 Mar 2011
6.250 23 Jan 2012
09000000 31 Oct 2008
09001000 31 Jan 2009
09003000 31 Mar 2009
09004000 31 Oct 2009
09006000 31 Jan 2010
09500000 5 Mar 2009
09501000 31 Jan 2010
09501100 31 Jan 2010
09520000 1 Nov 2011
09521000 1 Nov 2011
09522000 1 Nov 2011
09531000 15 Jun 2010
09534000 15 Jun 2010
10000000 6 June 2011
10001000 13 Oct 2011
10000000 6 June 2011
10001000 13 Oct 2011
1
VCS 3.110 and 4.110 are inactive versions but remain the latest and only recommended versions for use with EVA3000/5000 arrays.
P6300/P6500 EVA
This table identifies which versions of controller software are active and inactive. Active and inactive are defined as:
– Active: An active version has full Engineering support. Issues are addressed and patches can be provided.
– Inactive: An inactive version has limited Engineering support. Customers will be requested to move to an active version, if one is available. Engineering is
available for consultation but lab resources are not available to address issues. The escalation path for an issue on an inactive version is limited. The oldest active
software version goes inactive approximately six months after a new version is released. For example, if the current active versions are 09520000, 09521000,
and 09522000, 09520000 goes inactive six months after 09534000 is released.
EVA3000/5000
EVA4000/6000/8000 and 4100/6100/8100
EVA4400
To Next Page
Loading...
Need help?
General
