Volume
Growth
1.1
HP DButil
3
1
See Table 4.3, "RSM host agent support" for host volume mounting restrictions.
2
Always use the same version of HP RSM host agent and server software.
3
HP DButil can be used "as is" for current supported configurations. No additional changes, enhancements, or test support will be accepted. HP recommends purchasing HP Data Protector Zero Downtime Backup/Instant Recovery solution as the
proper migration path.
4
This is an iSCSI only implementation and only applies to HP P6000 Command View. For more information, see the EVA iSCSI information available on the EVA iSCSI Connectivity Option
(http://h18000.www1.hp.com/products/storageworks/evaiscsiconnect/index.html
) and the MPX200 Multifunction Router (http://h18006.www1.hp.com/products/storageworks/mpx200mr/index.html?jumpid=reg_R1002_USEN) websites.
5
For the HP X3000 Network Storage Gateways, HP SVG is supported on Windows Storage Server 2003 only.
6
Only English and Japanese versions of this operating system are supported.
Citrix XenServer HP Enterprise Edition
HP HP-UX 11.23 PI/11iv2 (64b Intel)
6
Operating System
HP X1000/X3000 Network Storage Systems and Gateways
HP HP-UX 11.23 PI/11iv2 (64b PA-RISC)
6
HP HP-UX 11.31/11iv3 (64b Intel)
6
HP Tru64 5.1b-4
This table lists the supported servers, operating systems and application integration for P6000 software. A bullet (•) indicates support on all P6000 EVA models, a specific model number indicates support with that model only, and a blank cell indicates no support.
The environments are:
HP P6000 Business Copy Basic I/O—The ability for HP P6000 Business Copy to work with an operating system or application is determined by the operating system support documents posted on the Single Point of Connectivity Knowledge (SPOCK) website
(http://www.hp.com/storage/spock
). (To enable SPOCK access, you must sign up for an HP Passport.) To access SPOCK, see Table 7.0. If an operating system is supported with a particular P6000 EVA model and controller software version, then HP P6000 Business
Copy is supported with that operating system. There may or may not be support through HP P6000 RSM on that operating system, as indicated in this table.
HP P6000 Continuous Access Basic I/O—The ability for HP P6000 Continuous Access to work with an operating system or application is determined by the operating system support documents posted on the Single Point of Connectivity Knowledge (SPOCK)
website (http://www.hp.com/storage/spock
). (To enable SPOCK access, you must sign up for an HP Passport.) To access SPOCK, see Table 7.0. If an operating system is supported with a particular P6000 EVA model and controller software version, then HP P6000
Continuous Access is supported with that operating system. There may or may not be support through HP P6000 RSM on that operating system, as indicated in this table.
HP P6000 RSM host agent—The HP P6000 RSM host agent is installed on servers running this operating system. The CLUI client is also supported on this operating system if the HP P6000 RSM host agent is supported on it.
HP Storage Volume Growth—The ability for HP Storage Volume Growth to work with this operating system.
HP P6000 RSM Server—The ability for HP P6000 Replication Solutions Manager to be installed on this operating system. You can use HP P6000 RSM Server to manage LUNs that are presented to any P6000 EVA-supported operating system.
HP P6000 SmartStart Storage—The ability for HP P6000 SmartStart Storage to work with this operating system.
HP P6000 CV and EVAPerf /HP P6000 Performance Data Collector —The ability for HP P6000 Command View and HP P6000 Performance Data Collector to work with this operating system.
HP SSSU—The ability for HP Storage System Scripting Utility to be installed on and work with this operating system.
Dedicated management server
Environment
HP P6000 RSM
host agent
1,2
HP P6000 CV
10.0,
Performance
Advisor &
Performance
Data Collector
10.0
Server, OS, or application type
HP P6000 RSM
server
To Next Page
Loading...
Need help?
General
