(EVA4400)
XCS
095xx000
(EVA6400/8
400)
XCS
10001000
1
(EVA4400)
XCS 10001000
1
(EVA6400/8400)
XCS 10001000
1
(P6300/P6500
EVA)
Containers
10 28 28 28 28 28
• • •
Mirrorclones
4
• • • • • •
• • • • • •
10 28 28 28 28 28
• • •
• • • • • •
• • • • • •
• • • • • •
• • • • • •
• • • • • •
• • • • • •
• • • • • •
• • • • • •
Snapshots
• • • • • •
• • • • • •
16 64 64 64 64 64
10 28 28 28 28 28
• • • • • •
• • • • • •
• • •
Space-efficient empty container
Maximum number of virtual disks supported with MULTISNAP commands (HP SSSU)
Restore data from snapshot to source virtual disk
4
Create snapclones in preallocated containers
Set disk group (for snapclones)
Maximum number of snapshots per source virtual disk
2
Set Vraid in copy
Create fully-allocated snapshots in preallocated containers
Create containers (for snapclones)
Resynchronize data from source virtual disk to mirrorclone
Restore data from mirrorclone to source virtual disk
Create mirrorclones
Space-efficient empty container
Online virtual disk migration (Vraid and disk group)
Maximum number of virtual disks supported with MULTIMIRROR commands (HP
SSSU)
Create mirrorclones of virtual disks in DR groups
4
1
XCS 10001000 superceds XCS 10000000.
2
16 TB maximum across the parent and all active snapshots of that parent. For XCS 09501x00, the maximum is 80 TB.
3
Specifically, you cannot mount snapshots or snapclones on a Windows host that is running the HP P6000 Replication Solutions Manager host agent and is directly attached to an array running XCS controller
software.
4
Supported with virtual disks up to 2TB only.
Local replication features depend on the controller software version. An HP P6000 Business Copy license is required to use these features. When using one of the P6000 software user interfaces or command
line interfaces, if the selected resource does not support an action, it will not be available in either the user interface or the command line interface. For example, in HP P6000 Replication Solutions Manager, if
you try to create a container on an array that does not support containers, the New Container action will not work.
6.2 Supported local replication feature by controller software version
Direct connect
Feature
Boot from SAN
Controller software version
Maximum size of a container
Maximum number of virtual disks supported with MULTISNAP commands (HP SSSU)
32 TB
Not supported in HP P6000 Replication Solutions Manager environments, except with certain restrictions
3
for Windows
hosts.
If the operating system supports Boot from SAN, replication of a point-in-time copy of the boot volume (snapshot,
snapclone, or mirrorclone) is supported.
2 TB (less 1 GB)
Set Vraid in copy
Restore data from snapshot of mirrorclone to source virtual disk
Controller software enforced cross Vraid guidelines
To Next Page
Loading...
Need help?
General
