HP Ew2400 - JetDirect Print Server User Manual

ENWW HP Jetdirect Configuration Page 235
86 FOR
MULTILANGUAGES
UPGRADE AGAIN
When upgrading a supported print server that contains a
firmware version prior to X.24.00, it will be necessary to
perform the firmware upgrade again if you want the print
server to support management tools (for example, the
embedded Web server) using non-English languages.
F1 TRYING TO
CONNECT TO
SERVER
The HP Jetdirect print server is trying to connect to the
NetWare server(s). This is a normal message. Wait until
either the connection is established or another status
message appears.
F2 TFTP IN
PROGRESS
The print server is attempting to use TFTP to obtain TCP/IP
configuration settings over the network.
F3 BOOTP/RARP IN
PROGRESS
The print server is attempting to use BootP or RARP to
obtain TCP/IP configuration settings over the network.
F4 BOOTP/DHCP IN
PROGRESS
The print server is attempting to use BootP or DHCP to
obtain TCP/IP configuration settings over the network.
Table 9.11 Error Messages (11 of 11)
Error Code and
Message
Description

HP Ew2400 - JetDirect Print Server Specifications

General

Brand	HP
Model	Ew2400 - JetDirect Print Server
Category	Print Server
Language	English