ENWW Using the Embedded Web Server 152
Wireless
Use this link to manage secure wireless configuration settings. For
the features and parameter settings on this page, see Table 4.3
.
Network Statistics
This page is used to display counter values and other status
information currently stored on the HP Jetdirect print server. This
information is often useful to diagnose performance and operational
problems associated with the network or network device.
Protocol Info
This page provides a list of various network configuration settings
on the HP Jetdirect print server for each protocol. Use these lists to
validate your desired settings.
Configuration Page
This page provides a view of the HP Jetdirect configuration page
that contains a summary of HP Jetdirect status and configuration
information. The contents of this page are described in Chapter 9
.
Authentication
Behavior:
Reauthenticate on
Apply
Enable (check) or disable (clear) this checkbox to control
authentication when you click Apply on this page,
assuming valid configuration entries have been made.
Note: This parameter does not apply to security or other
configuration wizards. Changes to parameters through
a wizard will always cause the print server to
reauthenticate.
If disabled (default), the print server will not attempt
reauthentication unless configuration changes cause the
print server to disconnect and reconnect to the network.
If enabled, the print server will always try to reauthenticate
using the configuration values set.
Table 4.14 802.1X Configuration Settings (2 of 2)
Item Description
To Next Page
Loading...
Need help?
General
