ENWW HP Software Solutions Summary 25
4. Select Connect to a printer on the Internet and enter the
print server’s URL:
http://IP_address[/ipp/port#]
where IP_address is the IP address configured on the
HP Jetdirect print server. [/ipp/port#] identifies the port
number, which is port 1 for single-port 620n and en3700 print
servers (default is /ipp/port1).
Then click Next.
5. You will be prompted for a printer driver (the HP Jetdirect
print server does not contain printer drivers, so your system
cannot automatically obtain the driver). Click OK to install the
printer driver onto your system and follow the instructions on
the screen. (You may need your printer CD-ROM to install
the driver.)
6. To complete the print path setup, follow the instructions on
the screen.
Windows Me IPP Client
The IPP implementation on the HP Jetdirect print server is
compatible with Windows Me IPP-client software. The IPP client
is installed from the Add-Ons folder on the Windows Me CD-ROM.
For installation and setup of a Windows Me IPP client, see the
instructions provided with the Windows Me CD-ROM.
Novell Supplied Software
The HP Jetdirect print server is compatible with IPP running on
NetWare 5.1 with SP1 or later. For NetWare client support, refer
to your NetWare technical documentation or contact Novell.
Example:
http://192.160.45.40 An IPP connection to HP Jetdirect
620n/en3700 print server with IP
address 192.160.45.40. (“/ipp/port1” is
assumed and not required.)
To Next Page
Loading...
Need help?
General
