ENWW TCP/IP Configuration 44
sm 1 The subnet mask tag. The subnet mask will be used by
the HP Jetdirect print server to identify the portions of an
IP address that specify the network/subnetwork number
and the host address.
gw 3 The gateway IP address tag. This address identifies the
IP address of the default gateway (router) that the
HP Jetdirect print server will use for communications
with other subnets.
ds 6 DNS (Domain Name System) server’s IP address tag.
Only a single name server can be specified.
lg 7 The syslog server’s IP address tag. It specifies the server
that the HP Jetdirect print server sends syslog messages
to. For more information, see Appendix A
.
hn 12 The host name tag. This tag does not take a value but
causes the BOOTP daemon to download the host name
to the HP Jetdirect print server. The host name will be
printed on the Jetdirect configuration page, or returned on
an SNMP sysName request by a network application.
dn 15 Domain name tag. Specifies the domain name for the
HP Jetdirect print server (for example, support.hp.com). It
does not include the host name; it is not the Fully Qualified
Domain Name (such as printer1.support.hp.com).
ef 18 Extensions file tag that specifies the relative path name of
the TFTP configuration file.
Note: This tag is similar to the vendor-specific tag T144,
described below.
na 44 Tag for IP addresses of the NetBIOS-over-TCP/IP Name
Server (NBNS). A primary and secondary server may be
specified in order of preference.
lease-time 51 DHCP IP address lease duration time (seconds).
tr 58 DHCP T1 timeout, specifying the DHCP lease renewal
time (seconds).
Table 3.1 Tags Supported in a BOOTP/DHCP Boot file (2 of 4)
Item RFC
2132
Option
Description
To Next Page
Loading...
Need help?
General
