37
NOTE:
1. If tap “Remind me later”, the app notification will pop up every time when the camcorder is
connected.
2.When the smart phone’s Wi-Fi is occupied by the camcorder, iOS system will auto switch to cellular
data, and the network is still useable; but, Android system won’t. Please attention the following
notices to upgrade new firmware.
(1)iPhone User: Because the smart phone’s Wi-Fi is connected with the camcorder, iPhone will use
cellular data to download the new firmware. If you don’t want to use cellular data to download,
cut off the smart phone’s Wi-Fi connection with camcorder firstly, then connect with local area
network. Then, open the app once again and tap “Upgrade Now” to download new firmware to
smart phone.
(2)Android User: Because the smart phone’s Wi-Fi is connected with the camcorder, Android
phone has no network to download the file. Please cut off smart phone’s Wi-Fi connection with
the camcorder firstly, and connect with local area network. Or, turn off the Wi-Fi, and use cellular
data. Then, open the app once again and tap “Upgrade Now” to download new firmware to smart
phone.
To Next Page
Loading...
