EasyManua.ls Logo

HP f560x - User Manual

HP f560x
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
f560x
Car Camcorder
User Manual
Question and Answer IconNeed help?

Do you have a question about the HP f560x and is the answer not in the manual?

Overview

This document describes the HP f560x Car Camcorder, a device designed for real-time video recording while driving. It also supports an HP rear camera.

Function Description

The HP f560x Car Camcorder is a dashcam that records video and offers various driving safety features. It automatically starts recording when the car engine is started and stops when the engine is switched off. It features emergency recording, speed cam alerts, speed limit alerts, driver fatigue alerts, lane departure warning system (LDWS), forward collision warning system (FCWS), and headlight warning. The device can also take snapshots and offers parking mode options (Park Recording, Motion and Collision Detection, or Timelapse). The camcorder can be connected to mobile devices via Wi-Fi using the "Go Dashcam" application for preview, playback, download, and settings adjustment.

Important Technical Specifications

  • Image sensor: 1/2.8" CMOS sensor
  • Effective pixels: 1920 (H) x 1080 (V)
  • Storage media: Supports Micro SDHC, up to 32GB class 10 speed or greater
  • LCD display: 2.31" LCD color TFT
  • Lens: Wide Angle Fixed Focus lens, Aperture: Up to F1.8
  • Focus range: 1.5m~Infinity
  • Satellite System: GPS (frequency: 1575.42MHz)
  • Video resolution: 1080P/ 30 fps, 1080P/ 27.5 fps, 720P/ 30 fps, 720P/27.5 fps
  • Video format: MOV
  • Still image (Photograph) resolution: Depends on video resolution setting
  • Still image (Photograph) format: DCF (JPG)
  • Shutter: Electronic shutter
  • G-Sensor: 3-Axis G-Force sensor
  • ISO: Auto
  • White Balance: Auto
  • Microphone: Built-in
  • Speaker: Built-in
  • Interface: Mini USB
  • Power: Super Capacitor
  • Operating Temperature: 0° ~ 45° C
  • Operating Humidity: 20 ~ 70% RH
  • Storage Temperature: -20° ~ 70° C
  • Dimensions: 56.5 x 30 x 58 mm
  • Weight: Approx. 74g
  • Built-in IEEE 802.11g/n(HT20) Wi-Fi chip: RTL8188FTV
  • Wi-Fi Frequency range: 2412~2472MHz (for EU)
  • Wi-Fi Channel: Ch1~Ch13 (for EU)
  • Wi-Fi Max. output: 11.29dBm EIRP (for EU)

Usage Features

  • Automatic Record: The camcorder starts recording automatically when the car engine is started and stops when the engine is switched off.
  • Emergency Recording: When the Collision Detection function is enabled and a collision is detected, the camcorder automatically triggers emergency recording. Emergency files are saved in a separate folder and are protected from being overwritten by normal loop recording.
  • Add Speed Point: Users can customize speed cam positions. The product supports up to 50 speed camera locations.
  • Picture in Video: Allows taking snapshots of the current scene during recording.
  • Driving Safety Functions:
    • Speed Cam Alert: Provides audible and screen messages when approaching a speed cam location.
    • Speed Limit Alert: Triggers an audible alert and screen message when exceeding a set speed limit (30~125 km/h).
    • Driver Fatigue Alert: Issues an audible alert and screen message one hour after recording begins, repeating every half hour afterwards.
    • LDWS (Lane Departure Warning System): Produces audible and screen messages when driving off or changing lanes at speeds over 70 km/h.
    • FCWS (Forward Collision Warning System): Issues audible and screen messages when driving at speeds over 60 km/h and the distance to the front vehicle is less than 20m.
    • Headlight Warning: Produces audible alerts and screen messages when detecting poor lighting conditions (rainy/cloudy weather, night, basements, parking lots, tunnels).
    • FCMD (Front Car Move Detection): Issues audible alerts and screen messages when the front car moves and the user doesn't start to drive forward.
  • Parking Mode: Offers three options when parked (requires ACC cable, not included):
    • Park Recording: The camcorder powers off after 10 seconds and enters park recording mode. It will turn off the screen temporarily but continue recording. If collision or vibration is detected, it triggers emergency recording.
    • Motion and Collision Detection: Similar to Park Recording, but specifically detects motion in front of the lens or any vibration/collision, triggering emergency recording.
    • Timelapse: Records continuously in timelapse mode.
  • Collision Detection: Sensitivity can be set to High, Normal, Low, or Off.
  • Playback Videos and Photos: Allows viewing recorded videos and photos on the device.
  • Deleting Files: Provides options to delete individual files or all files in a folder. Deleted files cannot be recovered.
  • Go Dashcam Application: A mobile application for Android (Google Play) and iOS (App Store) that connects to the camcorder via Wi-Fi.
    • Camera preview, record, snapshot: View live feed, start/stop recording, and take snapshots from the mobile device.
    • Playback, delete, download: Playback, delete, and download recorded files from the camcorder to the mobile device.
    • Local album: View downloaded files on the mobile device.
    • Camera Setting: Adjust camcorder settings via the app.

Maintenance Features

  • Memory Card Management: The manual recommends formatting the microSD card once a month to ensure optimal performance. It supports SDHC class 10 cards up to 32GB.
  • Lens Cleaning: Users are advised not to touch the lens with fingers to avoid grease marks and to clean the lens regularly for clear videos and pictures.
  • Date/Time Setting: Users should set up the time zone, time, and date accurately before using the camcorder. The manual also recommends resetting the date and time if the device is not used for over 7 days to ensure video file time accuracy.
  • Software Installation: The device comes with a CD-ROM containing the SuperCar software, which can be installed on a computer for viewing recorded videos and GPS data on an electronic map.
  • Firmware Updates: The "Firmware Version" setting in the Go Dashcam app indicates the current firmware version, implying that updates may be available.
  • Power Source: Only the supplied car charger should be used to avoid equipment damage or battery explosion.
  • Environmental Considerations: The manual provides warnings regarding extreme temperatures, co-location with other transmitters, and proper disposal of waste electrical and electronic equipment and batteries.

HP f560x Specifications

General IconGeneral
BrandHP
Modelf560x
CategoryDash Cameras
LanguageEnglish

Related product manuals