HP f560x - Speed Cam Alert

24
3.4.1 Speed Cam Alert
If the Speed Cam Alert function is enabled, once your car’s location
is determined by GPS and approaches a speed cam, this product
produces audible alert and screen message.
To enable the Speed Cam Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Speed Cam Alert, and
then press the button for entering function menu.
3. Press the / button to select On, and then press the
button to enable the function.
4. Press the button to return recording screen.
5. The alarm screen turns red to remind you to slow down if you
are driving faster than the speed limit.
Note:
The speed cam alert function must have the speed cam datum from the country you use. The
function will be void if the product is used in any other countries. Please consult with the shop
you purchased if the function is void. There is no guarantee the speed cam datum will be
included for the worldwide countries.