HP f560x - Powering the Camcorder on; off; Auto Power On;Off; Manual Power On;Off; Reset

16
2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
Start the car engine, wait a few seconds to charge the camcorder,
and then screen will light up and the camcorder will automatically
power on and start recording.
Once the vehicle engine shuts down, the camcorder automatically
saves the recording and turns off the power.
2.5.2 Manual Power On/Off
To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 2
seconds.
2.5.3 Reset
Press and hold the Power button for 8 seconds to reset the device.