4–26 Maintenance and Service Guide
Removal and replacement procedures
18. If it is necessary to replace the display panel, remove the two Phillips PM2.5×5.0 screws 1 that secure the
display panel to the enclosure, and then remove the panel 2. The display panel is available using spare part
number 577070-001 (LED) or 577068-001 (CCFL).
19. If it is necessary to replace the display panel brackets, remove the two Phillips PM2.0×30 screws 1 that secure
each bracket to the display panel, and then remove the brackets 2. The Display Bracket Kit is available using
spare part number 530995-001 (LED) or 579597-001 (CCFL).
Downloaded from LpManual.com Manuals
To Next Page
Loading...
