Setup Utility
Maintenance and Service Guide 5–3
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
■ To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to
select Exit > Exit Saving Changes, and then press
enter.
■ To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to
select Exit > Exit Discarding Changes, and then press
enter.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎
Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.
Main menu
Security menu
Select To do this
System information ■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size,
system
BIOS, and keyboard controller version (select models only).
Select To do this
Administrator password Enter, change, or delete an administrator password.
Power-On Password Enter, change, or delete a power-on password.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General
