4–28 Maintenance and Service Guide
Removal and replacement procedures
22. If it is necessary to replace the wireless antennas, detach the wireless antenna transceivers 1 from the display
enclosure. The transceivers are secured with double-sided tape.
23. Release the wireless antenna cables from the tabs 2 built into the display enclosure shielding.
24. Remove the wireless antenna transceivers and cables 3 from the display enclosure. The wireless antennas are
available using spare part number 582068-001.
Reverse this procedure to reassemble and install the display assembly.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
