HP G72 User Manual

4 Removal and replacement procedures
Preliminary replacement requirements
Tools required
The following tools are needed to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
Service considerations
Before disassembly or assembly procedures, review and adhere to all service considerations.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
34 Chapter 4 Removal and replacement procedures

HP G72 Specifications

General

Display Size	17.3 inches
Resolution	1600 x 900
Graphics	Intel HD Graphics or ATI Mobility Radeon HD 5470
Wireless	802.11 b/g/n
Battery	6-cell Lithium-Ion
Operating System	Windows 7
Weight	6.6 lbs (3 kg)
Optical Drive	DVD±RW
Networking	10/100 Ethernet
Ports	3 x USB 2.0, HDMI, VGA
RAM	Up to 8 GB DDR3