HDD Troubleshooting Guide Page 31 of 48
7. Select the “Test” tab.
8. Select “Custom” and “Unattended” test.
9. Select “+” on storage and select “+” for the HDD testing.
10. To run the DST Quick test, select only the “Short Offline Self Test”.
11. To run the DST Comprehensive test, select only the “Extended Offline Self
Test”.
12. Select “Begin Test”. The test will run and will report any errors that are
found.
13. Diagnostics log saving
To save the result, select Save and Save to Floppy will appear or Save to USB key if
installed.
To Next Page
Loading...
