Flags
Used:
Flag 2.
Memory
Required:
164 bytes: 116 for program, 48 for variables.
Program
Instructions:
1. Key in the program routines; press [c] when done.
2. Press Ixeq I
and
the appropriate label.
• A
for
area
conversion,
or
• L for length conversion, or
• T for temperature conversion.
3.
Press IR/S I
until
the appropriate
input
prompt
appears.
4. Key in input (or press
IR*
Ito recover the input if it had been in
the display
when
the routine was started).
5. Press IR/SI until the prompt (with a result) corresponds to the
units you
want
to find.
6. Go to step 3 for another conversion.
7. Press
[cj
to clear the prompt
and
end the program.
Variables
Used:
C Temperature in degrees Celsius.
F Temperature in degrees Fahrenheit; or feet.
R Temperature in degrees Rankine.
K Temperature in kelvins.
7
Inches.
M
Meters.
Example
1.
Convert
212°F
to kelvins.
Keys:
Display:
Description:
XEQl
T
C?value
Selects
the
temperature
conversion
routine.
r/S
I
F?value
Searches
for
the
Fahr
enheit
prompt.
14:
Miscellaneous
Programs
233
To Next Page
Loading...
