HP HP-32S - Running a Program; Executing a Program (XEQ)

Running a Program
To run or execute a program, program entry cannot be active (no pro
gram-line numbers displayed; PRGM off). Pressing QD will cancel
program entry.
Executing a Program (XEQ)
Press rxEQl label to execute the program labeled with that letter.* The
PRGM annunciator blinks on and off while the program is running.
If necessary, enter the data before executing the program.
Example. Run the program labeled Ato find the areas of three dif
ferent circles with radii of 5, 2.5, and 2ir. Remember to enter the
radius before executing A.
Keys:
5rxEQl A
2.5fXEQl A
2HHLH
Display:
78.5398
19.6358
124.0251
Description:
Enters the radius, then
starts program A. The
resulting area is
displayed.
Calculates area of sec
ond circle.
Calculates area of third
circle.
' If there is only one program in memory, you can also execute it by pressing Hi GTO IQQ
|"r7s~| (run/slop).
5: Simple Programming 75