Item Name Description
1 Reset button For the different uses of this button, see the HPE Integrity
Superdome X and Superdome 2 Onboard Administrator User
Guide.
2 OA management LAN port Standard CAT5e (RJ-45) Ethernet port (100/1000Mb) which
provides access to the management subsystem. Access to the
OA's CLI and GUI interfaces, interconnect modules, and iLO
features, such as Virtual Media, requires connection to this port.
3 UID LED Blue = UID on
4 Active OA LED Indicates which OA is active
5 Health LED Green = OK
Red = Critical error
6 USB USB 2.0 Type A connector used for connecting the enclosure DVD
module. Connects to the USB mini-A port on the GPSM.
NOTE:
You must connect the USB cable between the OA module
and the GPSM to ensure proper system functionality.
7 Serial debug port Serial RS232 DB-9 connector with PC standard pinout.
IMPORTANT:
This port is for OA debug use only, and should not be
connected during normal system operation.
8 VGA VGA DB-15 connector with PC standard pinout. To access the
KVM menu or OA CLI, connect a VGA monitor or rack KVM
monitor for enclosure KVM.
DVD module LEDs and components
62 Troubleshooting
To Next Page
Loading...
