New and changed information
• 794235–007 edition
◦ Updated OS support list
◦ Added links to current OS and spare parts information
• 794235–006 edition
◦ Updated access to OS white papers for firmware updates
◦ Updated Insight Display screenshots
◦ Included component ID for both XFM and XFM2 modules
◦ Added notes that both XFM and XFM2 modules are referred to as XFM in this document and not to
mix module types in the same system
• 794235-005 edition
◦ Added details for safely powering off an enclosure
◦ Added BL920s Gen9+ blade support
◦ Added FlexFabric 20 Gb 2P 650FLB and 650M adapter support
◦ Added note about scrolling the Insight Display
◦ Added instructions to save EFI variables to disk
◦ Added sections on troubleshooting the OA battery
◦ Updated illustrations for new HPE standards.
◦ Updated Insight Display screens.
◦ Added troubleshooting scenario where PXE fails to find the boot file.
◦ Updated references to the new XFM2 crossbar modules.
• 794235-003 edition
◦ Added BL920s Gen9 blade support
◦ Added SLES 11 SP4 and SLES 12 OS support
◦ Added RHEL 6.6, RHEL 6.7, and RHEL 7.1 OS support
◦ Added Windows 2012 R2 OS support (Gen8)
◦ Added ESXi OS support (Gen8)
◦ Moved firmware update information from installation chapter to dedicated chapter. Refer to
firmware matrix and release notes for correct information.
◦ Removed detailed SLES boot/shutdown information and add reference to Linux and Windows
white papers.
◦ Minor text changes and clarifications throughout
New and changed information 7
To Next Page
