37
Muting an Active Voice Call
During a call, you can mute your microphone so that the person
with whom you are speaking cannot hear you, but you can still
hear him or her. This is useful if you do not want the other person
to hear a conversation or background noise on your side of
the call.
■ From the Phone keypad, tap the mute icon in the Command
bar to mute or unmute a call.
Placing a Call On Hold
During a phone call, tap Hold on the Phone keypad to put the call
on hold. The call on hold appears on the top right of the dialer
screen. You can switch between calls by tapping the call on hold.
Note: You can have only one call on hold while the other call is
active. Also, when a call is placed on hold, the call is not
disconnected.
360338-xx1 Onyx How Do I.book Page 37 Wednesday, June 23, 2004 1:34 PM
To Next Page
Loading...
