HP iPAQ h6310 - Automatically Connecting to a Network; Manually Entering New Network Settings

45
Automatically Connecting to a Network
1. If one or more networks are present, the Network Indicator
icon appears in the Navigation bar. Tap the network you
want to connect to, then tap whether the network connects to
the Internet (does not use proxy settings) or Work (uses proxy
settings).
2. If you are prompted for a Network Key (WEP), enter it and
tap Connect. If you are not sure, contact your network
administrator.
Manually Entering New Network Settings
A wireless network can be added either when the network
is detected (the Network Indicator icon is showing in the
Navigation bar) or manually by entering setting information.
To manually add a wireless network:
1. Be sure Wi-Fi is powered on.
2. Tap the Connections icon > Settings > Advanced tab >
Network Card button > Wireless tab > Add New Settings.
360338-xx1 Onyx How Do I.book Page 45 Wednesday, June 23, 2004 1:34 PM