in-band (network) management
description ... 4-4, 4-10
included parts ... 1-4
installation
HP 100VG network checklist ... 1-2
hub installation summary ... 1-3
management console ... 1-21
mounting kit ... 1-4
mounting procedures ... 1-8
network connections ... 1-14
optional modules ... 1-5
rack or cabinet mounting ... 1-9
verifying hub operation ... 1-6
wall mounting ... 1-13
interface
See also cable
RS-232/V.24/V.28 ... 4-14
RS-422/RS-449/V.36 ... 4-14
V.35 ... 4-14
X.21 ... 4-14
Internet
obtaining latest drivers from ... 3-9
obtaining software from ... 3-8
Internet protocol ... 4-14
Internet Protocol (IP)
See IP
intruder log ... 2-14
Intruder prevention
send alarm ... 2-14
IP configuration
from HP Stack Manager ... 2-16
IPX test ... 3-5
L
LAN (Local Area Network)
displaying traffic statistics ... 2-8, 2-10
See also network
LAPB ... 4-14
LEDs ... 4-2
diagnosing hub status ... 3-2
flash rate ... 4-3
verifying hub operation ... 1-7
level 1 hub
See cascading hubs
link test ... 3-5
lower-level hub
See cascading hubs
M
management console ... 1-21, 4-10
communications settings ... 2-6
See also console port
direct serial connection ... 1-22
through data switching device ... 1-25
managing the hub ... 4-4, 4-8
distributed management ... 4-9
modems
cables ... A-8
communications settings ... 2-6
management console connection ... 1-23,
4-10
modular ports ... 4-5
modules
accessory products ... 1-19, 4-12
installation ... 1-5
mounting the hub ... 1-8
mounting kit ... 1-4
rack or cabinet ... 1-9
wall mounting ... 1-13
N
network
cable management ... 1-20, 4-6
cable requirements ... 1-15, A-4
cascading hubs ... 1-17, 4-8
connecting the hub ... 1-14, 4-5
enabling/disabling LAN ports ... 2-8
Ethernet/IEEE 802.3 ... 1-19
LAN port counters ... 2-10
LAN traffic statistics ... 2-8
network management ... 2-16, 4-4, 4-10
testing ... 2-16
using bundled/unbundled cables ... 1-16
none bundled
hub port cabling ... 2-10
normal-priority operation
HP Stack Manager and ... 2-10
Index
Index
4-Index
To Next Page
Loading...