Hewlett-Packard FTP Library Service
To access the HP FTP Library, follow these steps:
1. Enter the command:
ftp ftp-boi.external.hp.com
The ftp> prompt appears.
2. At the ftp > prompt, enter:
anonymous
3. At the password prompt, enter your internet e-mail address.
4. Change directories:
cd /pub/networking/software
5. At the ftp > prompt, set the transfer type to binary:
bin
6. List the contents of the directory:
dir
7. Retrieve the file by entering:
get
filename
(e.g., get j2414b.exe)
8. Quit the FTP session by entering:
quit
9. Extract the file (e.g., j2414b /x)
Troubleshooting
Troubleshooting
3-9
To Next Page
Loading...