10-4
IPv4 Access Control Lists (ACLs)
Overview of Options for Applying IPv4 ACLs on the Switch
clients. For information on RADIUS-assigned ACLs assigned by a RADIUS
server, refer to the chapter titled “Configuring RADIUS Server Support for
Switch Services”.
Note This chapter describes the IPv4 ACL applications you can statically configure
on the switch. For information on static IPv6 ACL applications, refer to the
chapter titled “IPv6 Access Control Lists (ACLs)” in the latest IPv6 Configu-
ration Guide for your switch.
To Next Page
Loading...
Need help?
General
