2-32
Configuring Username and Password Security
Password Recovery
Figure 2-12. Example of Disabling the Factory Reset Option
Password Recovery
The password recovery feature is enabled by default and provides a method
for regaining management access to the switch (without resetting the switch
to its factory default configuration) in the event that the system administrator
loses the local manager username (if configured) or password. Using Pass-
word Recovery requires:
■ password-recovery enabled (the default) on the switch prior to an attempt
to recover from a lost username/password situation
■ Contacting your HP Customer Care Center to acquire a one-time-use
password
Disabling or Re-Enabling the Password Recovery
Process
Disabling the password recovery process means that the only method for
recovering from a lost manager username (if configured) and password is to
reset the switch to its factory-default configuration, which removes any non-
default configuration settings.
The command to disable the factory-reset operation produces this caution.
To complete the command, press [Y]. To abort the command, press [N].
Displays the current front-
panel-security configuration,
with Factory Reset disabled.
Completes the command to
disable the factory reset option.
To Next Page
Loading...
