HP Kayak XU800 PC Workstation
Minitower
PC Workstations
HP Kayak XU800 PC Workstation 1-9
1
System Board Switches
Setup and BIOS History
For the latest BIOS, the flasher utility program, and the BIOS history refer to the
HP World Wide Web site. The BIOS is in the form IA11yy, where yy is the version
number.
Then select HP Kayak XU800 PC Workstation.
Switch Default
Position
Function:
1 UP
1
1. Switches can also be referenced as:
UP = Open = Off (disable)
DOWN = Close = On (enable)
Enables normal mode.
DOWN enables the BIOS recovery mode at next boot.
2 UP Reserved. Do Not change Default Setting
3 UP Enables User and System Administrator passwords.
DOWN clears the passwords at next boot.
4 UP Retains CMOS memory.
DOWN clears CMOS memory at next boot.
5 UP
Reserved 5-6. Do Not change Default Settings
6 DOWN
7 DOWN Enables keyboard power-on.
UP disables this option.
8 DOWN
9 DOWN Reserved 8-10. Do Not change Default Settings
10 UP
http://www.hp.com/go/kayaksupport
OPEN = UP CLOSED = DOWN
or
OFF = OPEN ON = CLOSE
OPEN = UP
CLOSED = DOWN
10 9 8 7 6 5 4 3 2 1
X
X X X X
X X X X X
Ka_sh_1.bk Page 9 Thursday, June 15, 2000 7:27 PM