Vertical black lines appear on the printed page.
Cause Solution
The print cartridge is depleted or damaged. Replace the print cartridge.
Rarely, the fuser is defective. Replace the fuser.
The printed page has a gray background.
Cause Solution
The wrong type of media is selected in the Printer
Preferences dialog box.
Open the Printer Properties dialog box, and then click
Printing Preferences. Select the correct media type from
the Type Is drop down menu. Click OK to close the Printing
Preferences dialog box, and then click OK again to close
the Printer properties dialog box.
The print density is too high. Open the Printer Properties dialog box, and then select the
Configure tab. Use the slide bar in the Print Density area
of the dialog box to change the print density setting. Click
OK to close the Printer Properties dialog box.
The media basis weight is too high. Change the media to a lower basis weight.
The print path needs to be cleaned. Clean the print path (see Cleaning the print path on page 26).
The printer is operating in humidity or temperature
conditions that are not within the recommended ranges.
Move the product to a different location.
The print cartridge is worn, damaged, or has been refilled. Replace the print cartridge.
Table 6-3 Solving print-quality problems (continued)
ENWW Print-quality troubleshooting 97
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
