4. Squeeze the two retaining tabs on the plastic door-link clip to release it from the hinge arm on
the print-cartridge door.
CAUTION Do not drop the clip into the gear assembly that is on the side of the printer.
Figure 5-10 Remove the rear panel and top-cover assembly (2 of 6)
Hint Reinsert the plastic door-link clip in the hinge arm or store it with the screws to
prevent losing it.
Figure 5-11 Remove the rear panel and top-cover assembly (3 of 6)
ENWW Covers 67
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
