5. Remove one screw (callout 2) from the back of the product.
2
Figure 5-12 Remove the rear panel and top-cover assembly (4 of 6; HP LJ 1020 printer shown)
6. The top-cover assembly and metal rear-panel are interlocked with plastic tabs. Plastic tabs also
secure the metal rear-panel at the bottom. Lift up the fuser cover at the top and pull it back
slightly. Lift the rear panel up and off the tabs on the bottom.
Figure 5-13 Remove the rear panel and top-cover assembly (5 of 6)
68 Chapter 5 Removal and replacement ENWW
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
