6. Two sheet-metal hook hinges (one on each side) secure the cover. Use a screwdriver to push
both hooks free, and then remove the ECU cover.
1
2
Figure 5-31 Remove the ECU assembly (4 of 6)
7. Release the plastic wire-retainer tab (arrow 1), and rotate the retainer up and away from the
chassis (arrow 2).
2
1
Figure 5-32 Remove the ECU assembly (5 of 6)
82 Chapter 5 Removal and replacement ENWW
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
