4. Adjust the side guides so that they lightly touch the paper stack but do not bend the paper.
2
Load Tray 2 or an optional 500-sheet tray
CAUTION: To avoid jams, do not load trays while the product is printing.
CAUTION: Do not fan the paper. Fanning can cause misfeeds.
1. Pull the tray out and lift up slightly to remove it from the product.
2. Pinch the release that is located on the left guide and slide the side guides to the correct paper
size.
A5
J
IS
B5
EXE
C
A4
LT
R
/LGL
ENWW Load trays 81
To Next Page
Loading...