Service menu
NOTE: An asterisk (*) symbol next to a service submenu option indicates that this is the current setting
for that option.
Access the service menu
1. Press the Setup button.
2. Use the arrow buttons to select Main Menu Service, and then press OK.
3. Use the arrow buttons to select the desired secondary-service option, and then press the OK
button.
4. Use the arrow buttons to select the desired submenu option, and then press OK .
Service menu item Submenu option Description
Print T.30 trace At end of call*
Never
Now
If error
Use a T.30 trace report to problem solve
fax transmission and receive errors.
Restore defaults Press OK to restore the product factory
settings.
Cleaning mode Press OK to start the cleaning process.
See
Clean the paper path on page 35 for
more information.
Less paper curl Off*
On
Lowers the fuser temperature.
Archive print
1
Off*
On
The archive print feature produces
output that is less susceptible to toner
smearing and dusting. Use archive print
to create documents that you want to
preserve or archive.
1
The Archive print setting is not the same as the print driver EconoMode setting. When you select EconoMode (draft) in the
printer driver, the product uses less toner, which extends the life of the print cartridge. Because less toner is applied to the
page in EconoMode, image quality (both clarity and contrast) is considerably decreased. HP does not recommend the full-
time use of EconoMode, because the toner supply might outlast the mechanical parts in the print cartridge (causing print-
quality problems). In this case, you must replace the print cartridge even though there is still a supply of toner present.
186 Chapter 7 Solve problems ENWW
To Next Page
