HP LASERJET M5025 - Page 265

The following dots-per-inch (dpi) settings are available in the Default Resolution drop-down menu:
●
300
●
600
●
FASTRES 1200
●
PRORES 1200
NOTE When a PRORES1200 setting is selected, documents are printed using a resolution of
1200 x 1200 dpi. This is the best print quality, but printing speed is slower than for documents
printed on the FASTRES 1200 setting, which uses a resolution of 1200 x 600 dpi.
When the PRORES 1200 setting is selected, documents are printed using a resolution of 1200
x 1200 dpi. This is the best print quality, but printing speed is slower than for documents printed
on the FASTRES 1200 setting, which uses a resolution of 1200 x 600 dpi
The following settings are available in the Resolution Enhancement Technology (REt) drop-down
menu:
●
OFF
●
LIGHT
●
MEDIUM
●
DARK
Trays Configuration
Under Printer Settings, choose Trays Configuration to open the Trays Configuration screen, as
shown in the following figure.
ENWW Macintosh HP Printer Utility 245
Macintosh