Figure 6-48 Trays Configuration screen
1. Choose Trays Configuration to change media size and type for each of the trays installed on your
device.
2. To change the media size, select a tray and then choose a different media size in the Default
Media Size drop-down menu.
3. To change the media type, select a tray and then choose a different media type in the Default
Media Type drop-down menu.
4. Click Apply Now to save the settings.
Lock Resources
Select Lock Resources to lock certain features of the HP LaserJet M5025/M5035 MFP. The Lock
Resources screen is shown in the following figure.
246 Chapter 6 Macintosh ENWW
Macintosh
To Next Page
Loading...
