Main motor
Before proceeding, remove the following components:
●
Paper-delivery tray. See
Paper-delivery tray (output bin extension) on page 21.
●
Left cover. See
Left cover on page 22.
●
Right cover. See
Right cover on page 25.
●
Front cover. See
Front cover on page 28.
Remove the main motor
1. Release one tab (callout 1), and then remove the holder (callout 2).
Figure 1-106 Remove the laser/scanner assembly (1 of 7)
2
1
74 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...