2. Install the USB flash drive into the rear host USB port.
The control panel displays a To format USB drive for Job Storage press OK message.
3. Press the OK button, and then follow the instructions on the control panel to complete the procedure
Step two: Update the print driver
Update the print driver in Windows
1. Click the Start button, and then click Devices and Printers.
2. Right-click on the name of the HP printer, and then select Printer properties.
3. In the Properties dialog, select the Device Settings tab.
4. Select Update Now, and then click OK. The print driver updates.
The updated print driver will include the Job Storage tab.
Create a stored job (Windows)
Store jobs on the USB flash drive for private or delayed printing.
NOTE: The print driver might look different than what is shown here, but the steps are the same.
1. From the software program, select the Print option.
ENWW Store print jobs on a USB flash drive to print later 39
To Next Page
Loading...
